Hard Drive Installation

Step 1: Remove the screw on the back panel (1 screw)

Step 2: Remove the screws on each side panel (4 total)

Step 3: Gently slide open the unit's cover

Step 4: Locate the 4 mounting holes and place the hard drive on them

Step 5: Locate the SATA cable and Power cable

Step 6: Turn the unit over and match the hard drive holes to the unit's mounting holes

Step 7: Screw the hard drive in place by using the 4 mounting screws

Step 8: Connect the SATA cable and Power cable to the hard drive and close cover